Start with the substrate从基材开始
DNS currently presents three fluorescent colorant families. Each family is organized around a different application area on this website.德诺森网站目前展示三类荧光着色剂。每一类产品都围绕不同的应用领域进行组织。
Polyester涤纶
Start with disperse fluorescent dyes.从分散荧光染料开始选型。
Plastics塑料
Start with solvent dyes.从油溶染料开始选型。
Inks, coatings, creative油墨、涂料与创意应用
Start with fluorescent pigments.从荧光颜料开始选型。
Match the product family to the route根据工艺路线匹配产品类别
Disperse fluorescent dyes分散荧光染料
The published routes are polyester HT/HP, thermosol and printing.网站已经公开的路线包括涤纶高温高压、热熔与印花。
Solvent dyes油溶染料
The published applications are plastics and masterbatch.网站已经公开的应用是塑料与色母粒。
Fluorescent pigments荧光颜料
The published applications are inks, coatings and creative uses.网站已经公开的应用是油墨、涂料与创意用途。
The HT/HP and thermosol figures on this website are shown for polyester disperse dyeing. They are not presented as conditions for plastics, inks or coatings.本网站的高温高压与热熔数字针对涤纶分散染色展示，并未作为塑料、油墨或涂料的工艺条件。
Use the published figures as trial starting points将公开数字作为试验起点
For polyester, DNS publishes an HT/HP starting point of 130 °C, pH 4.5–5.5, 45 minutes and a 1:25 liquor ratio. The thermosol route lists 180–220 °C. These are not universal production settings.针对涤纶，德诺森网站公开的高温高压实验起点为 130 °C、pH 4.5–5.5、45 分钟和 1:25 浴比；热熔路线列出 180–220 °C。这些数字不是通用生产设定。
Substrate construction, equipment and the target result change the final conditions. Confirm the product family, then run trials before fixing a production recipe.基材结构、设备和目标效果都会改变最终条件。应先确认产品类别，再通过试验确定生产配方。
Frequently asked questions常见问题
Which fluorescent colorant does DNS present for polyester?德诺森为涤纶展示哪类荧光着色剂？
Disperse fluorescent dyes, through HT/HP, thermosol and printing routes.分散荧光染料，网站所列路线包括高温高压、热熔与印花。
Which fluorescent colorant does DNS present for plastics?德诺森为塑料展示哪类荧光着色剂？
Solvent dyes, for plastics and masterbatch applications.油溶染料，用于塑料与色母粒应用。
Which fluorescent colorant does DNS present for inks and coatings?德诺森为油墨和涂料展示哪类荧光着色剂？
Fluorescent pigments, for inks, coatings and creative applications.荧光颜料，用于油墨、涂料与创意应用。